3D Printing — FDM and Resin, Prototype to Small Batch
Offered by GyanKosh
₹7 / gram
FDM in PLA, PETG, ABS and nylon, plus resin printing for detail parts. Priced by material weight, quoted from your STL.
- Typical turnaround
- 2–5 working days
- Minimum order
- 1 units
- Where the work is done
- GTTC Peenya, Bengaluru, GTTC Mysuru, GTTC Hubballi, GTTC Belagavi
Capabilities
- FDM up to 300 × 300 × 400 mm
- MSLA resin up to 190 × 120 × 200 mm
- Layer heights from 0.05 mm (resin) / 0.12 mm (FDM)
- Support removal and light finishing
- Batch printing of identical parts
- Print-orientation advice for load-bearing parts
Materials
PLA · PETG · ABS · TPU (95A) · Nylon (PA12) · Carbon-filled nylon · Standard resin · Tough resin
About this service
Upload an STL or STEP file and tell us the material — we return the print, supports removed and lightly finished. FDM runs on 0.4 mm nozzles at 0.12 to 0.28 mm layer height depending on what the part is for. Functional parts in PETG or nylon are printed at higher infill and wall count than a visual mock-up, so tell us which it is; it changes both the price and whether the part survives its job. Resin (MSLA) is for parts where the detail matters more than the strength — enclosures with fine text, connectors, dental and jewellery masters. Resin parts are washed and UV-cured before dispatch.
Process specifications
- FDM build volume
- 300 × 300 × 400 mm
- Resin build volume
- 190 × 120 × 200 mm
- FDM layer height
- 0.12 – 0.28 mm
- Resin layer height
- 0.05 mm
- Dimensional tolerance
- ±0.3 mm or ±0.3%, whichever is greater
- Accepted files
- STL, STEP, 3MF, OBJ
Frequently asked
How is the price worked out?
By the weight of material the sliced part actually uses, including supports, plus machine time. Send the file and we will come back with the exact figure — the per-gram rate on this page is the starting point for PLA.
Which material should I pick?
PLA for looks and fit checks, PETG for parts that must not snap, ABS where heat is involved, nylon for gears and living hinges, TPU where it needs to flex. Say what the part does in your enquiry and we will recommend one.
Can you print something larger than the build volume?
Yes, split into sections and bonded. Tell us where a seam is acceptable and we will plan the split around it.